HVLP Spray Gun, 1.4mm
Item no.: F.AB17G
Brand: Voylet
List price:
11,115 HUF
net
gross: 14,116 HUF
In stock: 88 pcs
HVLP (High Volume Low Pressure) Spray Paint Gun Alloy Airbrush Gravity Feed
Fluid Nozzle (mm): 1.4
Air pressure(PSI): 43
Capacity of Cup(ML): 600
Feed Type: Gravity
Air Consumption: 12-15CFM
Air inlet: 1/4"
This spray gun is rugged in construciton, and is built to yield exceptional value. The life of this product and the efficiency of its operation depend upon a knowledge of its construciton, use and maintenance.
Gravity feed cup hookup: Air pressure for atomization is regulated at extractor, Amount of fluid is adjusted by fluid control screw on gun, viscosity of paint, and air pressure.
Be sure to have the proper air pressure at the gun to operate. Proper air pressure for this tool should be 43PSI for lacquer and 53 PSI for enamel. Try spray. If it is too fine, decrease the air pressure or open fluid control screw. If the spray is too thick, close the fluid control screw. Regulate the pattern width and repeat adjustment of spray as needed.
Adjust fluid control screw and spray width adjustment screw to your desired pattern before using on production.
Clean all parts after use.
Fluid control screw: Turn right to decrease flow, left to increase.
Spray width adjusment screw: turn right for round, left for fan.
HVLP technology is more advanced compared to HP and is also suitable for working at lower pressure. In addition, you can save more material – even up to 30% than using HP technology. This technology is a good choice for painting steel structures, tools and furniture as it allows you to create a smooth and even coat of paint or paint. The only drawback of this technology is its high air consumption, which can even reach 370 l/min on some guns.
Features and technical data:
- Nozzle 1.4mm
- plastic cup (0.6l) with integrated drip-catching device, infinitely variable round/flat spray contol
- air micrometer
- universal wrench
- hollow key
- cleaning brush
Fluid Nozzle (mm): 1.4
Air pressure(PSI): 43
Capacity of Cup(ML): 600
Feed Type: Gravity
Air Consumption: 12-15CFM
Air inlet: 1/4"
This spray gun is rugged in construciton, and is built to yield exceptional value. The life of this product and the efficiency of its operation depend upon a knowledge of its construciton, use and maintenance.
Gravity feed cup hookup: Air pressure for atomization is regulated at extractor, Amount of fluid is adjusted by fluid control screw on gun, viscosity of paint, and air pressure.
Be sure to have the proper air pressure at the gun to operate. Proper air pressure for this tool should be 43PSI for lacquer and 53 PSI for enamel. Try spray. If it is too fine, decrease the air pressure or open fluid control screw. If the spray is too thick, close the fluid control screw. Regulate the pattern width and repeat adjustment of spray as needed.
Adjust fluid control screw and spray width adjustment screw to your desired pattern before using on production.
Clean all parts after use.
Fluid control screw: Turn right to decrease flow, left to increase.
Spray width adjusment screw: turn right for round, left for fan.
HVLP technology is more advanced compared to HP and is also suitable for working at lower pressure. In addition, you can save more material – even up to 30% than using HP technology. This technology is a good choice for painting steel structures, tools and furniture as it allows you to create a smooth and even coat of paint or paint. The only drawback of this technology is its high air consumption, which can even reach 370 l/min on some guns.
Features and technical data:
- Nozzle 1.4mm
- plastic cup (0.6l) with integrated drip-catching device, infinitely variable round/flat spray contol
- air micrometer
- universal wrench
- hollow key
- cleaning brush
Technical data
| Weight | 1 kg |
|---|---|
| Width | 100 mm |
| Depth | 160 mm |
| Height | 340 mm |
To order, please log in – after logging in you will see your own B2B price.
Similar products in this category (12)
Perhaps another one suits you better. All in this category ›
