16 Pcs 1/2" Dr. Metric Air Impact Wrench Kit

Impact Wrench:
-Standard Duty Air Impact Wrench 230 ft.lb. /312Nm

1/2" Dr. 6 pt. Impact Socket: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm

Accessory
1/2" Dr. Impact Extension Bar 125mmL
1/4" Mini Oiler
4mm Hex Key Wrench
Oil Pot
1/4" Air Nipple

Blow Case

Always wear safety goggles, hearing protection and protective clothing to help prevent injury.
Always operate air ratchets or air wrenches at 90 psig air pressure to ensure top performance and maximum durability of all components.
Always disconnect the tool from the air supply before installing, adjusting, changing or storing the tool.
Never use the tool if the trigger switch does not turn it “ON” or “OFF”.
If an automatic oiler system is not used, add a couple drops of air tool oil to the air inlet before operation. Add a few more drops after each hour of continual use. Proper lubrication of air tool will extend the life of unit.
Always use impact sockets with an air ratchet or air impact wrench.
Never run the air tool while placing the socket over the nut. Only trigger it when socket is in position.
Never over torque bolts and nuts with an air tool. The final tightening must be carried out by using a torque wrench set to torque specified by manufacturer.
Never tighten or loosen the nut that would require the use of the unit for more than 5 seconds at one time. Release the trigger and re-trigger it again.
Never raise the outlet pressure of the air compressor if the nut cannot be removed and do not continue attempt to loosen the nut. Use other appropriate tools and methods to remove it.
Always place the dust cover back when done with air tool.

Technical data

Accessories	piros műanyag tároló táska
Weight	4,3 kg
L – overall length	Légkulcs: 185mm légkulcsfej: 38-46mm hosszabbító szár: 125mm imbuszkulcs: 70
Imperial / metric	M
Quantity	16 db

Add to favourites

Compare