40 Psi Diaphragm Pump, 12v DC

Item no.: YFL-40

List price: 24,360 HUF net

gross: 30,937 HUF

In stock: 11 pcs

FL-40 ProPump 40 Psi Diaphragm Pump, 12v DC
12v DC, Quick connect fittings, Creates vacuum for suction

This pump is an on-demand water delivery pump.
This pump has been fitted with viton orings so that it is now compatible with biodiesel.
This quiet diaphragm pressure pump is ideal for use to supply water at town pressure in a caravan/RV set up. This pump can be used for so many different purposes - from bringing water to your shed, supplying a horse wash-down hose on the trailer or watering the garden (on a timer). It is perfect for your shower and a couple of outlets in your caravan, boat, shed or while camping. They are portable and easy to set up. Use it to fill your RV tanks with drinking water.
This Diaphragm Water Pressure pump will automatically turns itself on and off when you turn the tap on and off.

Product Features:
- Lightweight and made from non corroding materials
- Self priming
- Quiet
- Run dry Protection
- Easy to install
- Robust housing
- Simple to operate and easy to connect
- Low power consumption
- Automatically turns on and off
- For intermittent use only
- Comes with filter, fittings and instructions

Specifications:
- 12 volt
- Amperage: 9.2A (12 VDC) when under full load; 0.5A (110 VAC)
- Maximum capacity 17 L/Min (4.5 gpm)
- Pressure 40 PSI (2.75bar). When pressure builds to 40 psi, the pump will shut off until pressure is relieved.
- Sensor shuts off pump at 80°C (176°F)
- Nominal Fluid Temperature: 60°C (140°F)
- Max vacuum pressure ~10mm Hg
- Suction Lift 1.5m
- Head 4 metres
- Inlet and Outlet are 12.5mm (1/2 inch) hose barb
- Fittings are one straight barbed, one 90 degree barbed and one straight BSP
- Rubber Seal Type: Viton
- Includes Protective Strainer (For use in water applications only, for backup protection only)
Although originally designed for water pumping, The pump can run dry without damage.

Biodiesel Applications:

This pump is a very useful tool in dry wash resin towers. Simply plumb the pump in to the tower so that it pushes the biodiesel into the bottom of the tower and out the top. Use a ball valve at the outlet of the tower to restrict flow. The pump will build up to 40 psi and then shut off. It will turn back on as pressure is relieved from the slow flowing biodiesel exiting the tower. This allows full control of the flow rate through the tower so adequate flow rates can be achieved. This pump can be left on over-night and does not require any attendance once the proper valve opening has been set.

Methanol:

Our diaphragm pumps do not have explosion proof motors, so they are not rated for flammable fluids. However, the pump is magnetically driven and fully enclosed so we have personally found that it is generally ok for pumping methanol. We use it for pumping methanol from 55 gallon drums to processors. The orings are made of viton, which is acceptable for methanol for a certain period of time. But if this pump is to be used with methanol, these orings need to be swapped out with regular NBR seals to ensure a long life usage. The viton will usually be corroded in about 6 months, which will cause the pump to lose suction.